فروشگاه اینترنتی فروشگاه جوش آزما تجهیز / تجهیزات بازرسی و تستهای غیر مخرب NDT/ تست آلتراسونیک UT/ ضخامت سنج التراسونیک
ضخامت سنج خوردگی الکومتر Elcometer CG100
ضخامت سنج خوردگی الکومتر Elcometer CG100
Elcometer CG100 Corrosion Thickness Gauge
ضخامت سنج خوردگی الکومتر Elcometer CG100
ضخامت سنج خوردگی الکومتر Elcometer CG100

ضخامت سنج خوردگی الکومتر Elcometer CG100

Elcometer CG100 Corrosion Thickness Gauge
برچسب‌ها:
گارانتی 18 ماهه
موجود در انبار فروشگاه جوش آزما تجهیز
ارسال از امروز

130,000,000 4%

124,000,000 تومان

مشاهده محصول در سبد خرید

ضخامت سنج خوردگی الکومتر Elcometer CG100

ضخامت سنج خوردگی الکومتر Elcometer CG100 مخصوص بررسی فلزات برند الکومتر ساخت کشور انگلستان مدل Elcometer CG100 با گستره ای از حالت های نمایش و اندازه گیری،کنترل خودکار و ثبت اطلاعات محدوده اندازه گیری ضخامت سنج خوردگی CG100 الکومتر برای اندازه گیری پوشش و ضخامت مواد همچنین برای تعیین محل عیوب بسیار مناسب است.

قیمت این دستگاه را می توانید از مجموعه بازرگانی انجوش آزما تجهیز با 18 ماه گارانتی و ضمانت اصالت کالا دریافت نمائید. این محصولات و مابقی محصولات در این حوضه را میتوانید در دسته ضخامت سنج اولتراسونیک به راحتی مشاهده کنید.

ضخامت سنج خوردگی Elcometer CG100 دارای 4 مدل زیر می باشد:

  • CG100B
  • CG100BDL
  • CG100 ABDL
  • CG100 ABDL+

 

حالت های اندازه گیری ضخامت سنج Elcometer CG100 الکومتر به صورت اکو-اکو (Echo-Echo) و حالت پالس- اکو

(Puls-Echo) می باشد.

خروجی داده ها با USB و بلوتوث بر روی نرم افزار Elcometer وارد تحلیل می گردد.

 

ویژگی ها و مشخصات فنی ضخامت سنج التراسونیک خوردگی الکومتر ELCOMETER CG100 Corrosion Thickness Gauges:

پارت نامبر و مدل CG100B CG100BDL CG100ABDL CG100ABDL+
Material thickness digits display

 

 

 

 
B-Scan cross sectional display

 

 

 

 
Combined B-Scan and digits display

 

 

 

 
Scan bar display

 

 

 

 
Coating thickness display

 

 

 

 
A-Scan Display    

+ Rectified, – Rectified,
Full Waveform (RF)

 + Rectified, – Rectified,
Full Waveform (RF)
Measurement Mode PE, PETP (Temp Compensation),
EE (ThruPaint™), EEV,
CT (Coating) & PECT		 PE, PETP (Temp Compensation),
EE (ThruPaint™), EEV,
CT (Coating) & PECT		 PE, PETP (Temp Compensation),
EE (ThruPaint™), EEV,
CT (Coating) & PECT		 PE, PETP (Temp Compensation),
EE (ThruPaint™), EEV,
CT (Coating) & PECT
Measurement Rate
Manual:
Scan mode
Scan bar display		 4 readings per second
50 readings per second
6 readings per second		 4 readings per second
50 readings per second
6 readings per second		 4 readings per second
50 readings per second
6 readings per second		 4 readings per second
32 readings per second
6 readings per second
Measuring Range

PE: 0.63 – 508mm
(0.025 – 19.999 inches)
PETP: 0.63 – 508mm
(0.025 – 19.999 inches)
EE: 1.27 – 102mm
(0.050 – 4.000 inches)
EEV: 1.27 – 25.4mm
(0.050 – 1.000 inches)
CT: 0.01 – 2.54mm
(0.001 – 0.100 inches)
PECT: 0.63 – 508mm
(0.025 – 19.999 inches)
PECT: 0.01 – 2.54mm
(0.001 – 0.100 inches)

PE: 0.63 – 508mm
(0.025 – 19.999 inches)
PETP: 0.63 – 508mm
(0.025 – 19.999 inches)
EE: 1.27 – 102mm
(0.050 – 4.000 inches)
EEV: 1.27 – 25.4mm
(0.050 – 1.000 inches)
CT: 0.01 – 2.54mm
(0.001 – 0.100 inches)
PECT: 0.63 – 508mm
(0.025 – 19.999 inches)
PECT: 0.01 – 2.54mm
(0.001 – 0.100 inches)

PE: 0.63 – 508mm
(0.025 – 19.999 inches)
PETP: 0.63 – 508mm
(0.025 – 19.999 inches)
EE: 1.27 – 102mm
(0.050 – 4.000 inches)
EEV: 1.27 – 25.4mm
(0.050 – 1.000 inch)
CT: 0.01 – 2.54mm
(0.001 – 0.100 inches)
PECT: 0.63 – 508mm
(0.025 – 19.999 inches)
PECT: 0.01 – 2.54mm
(0.0005 – 0.100 inch)

PE: 0.63 – 508mm
(0.025 – 19.999 inches)
PETP: 0.63 – 508mm
(0.025 – 19.999 inches)
EE: 1.27 – 102mm
(0.050 – 4.000 inches)
EEV: 1.27 – 25.4mm
(0.050 – 1.000 inch)
CT: 0.01 – 2.54mm
(0.001 – 0.100 inches)
PECT: 0.63 – 508mm
(0.025 – 19.999 inches)
PECT: 0.01 – 2.54mm
(0.0005 – 0.100 inch)
Measurement Accuracy

± 1% or ±0.1mm
whichever is the greater

± 1% or ±0.1mm
whichever is the greater

± 1% or ±0.1mm
whichever is the greater

± 1% or ±0.1mm
whichever is the greater
Measurement Resolution

0.01mm (0.001 inches)

(((0.01mm (0.001 inches))))

{{0.01mm (0.001 inches)}}

0.01mm (0.001 inches)
Velocity Calibration Range

1250 – 13,995m/s
(0.0492 – 0.5510in/ms)

  1250 – 13,995m/s
(0.0492 – 0.5510in/ms)		  1250 – 13,995m/s
(0.0492 – 0.5510in/ms)

1250 – 13,995m/s
(0.0492 – 0.5510in/ms)
Additional Features:
High speed scan mode

 

 

 

 
Differential mode

 

 

 

 
Limit alarm mode

 

 

 

 
B-Scan display speed 15 seconds per screen

15 seconds per screen

  Adjustable display speed Adjustable display speed
Flaw mode    

Basic prove-up flaw detection using single element angle beam transducers

 Basic prove-up flaw detection using single element angle beam transducers
Calibration setups  ))6 factory & 64 user-definable setups transferrable to and from a PC archive((

6 factory & 64 user-definable setups transferrable to and from a PC archive

((6 factory & 64 user-definable setups transferrable to and from a PC archive))

 6 factory & 64 user-definable setups transferrable to and from a PC archive
Gates      3 fully adjustable gates: start, stop, width & threshold 3 fully adjustable gates: start, stop, width & threshold
Damping       Adjustable; impedance matching for optimising transducer performance
Pulser type

Dual square wave pulsers up to 140Hz pulse repetition rate

 {Dual square wave pulsers up to 140Hz pulse repetition rate}

Dual 200 volt square wave pulsers with adjustable pulse width(spike, thin, wide) and 50 volt cut/boost for greater penetration

 Dual 200 volt square wave pulsers with adjustable pulse( width)
(spike, thin, wide) and 50 volt cut/boost for greater penetration
Gain  Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi

Automatic gain control (AGC) with 110dB range (limited), or selectable gain: vlow, low, medium hi or vhi

Manual, automatic gain control (AGC) with 110dB range (limited)

Manual, automatic gain control (AGC) with 110dB range (limited)
Timing

((Precision 25MHz TCXO with single shot ))100MHz 8bit ultra low power 8 bit digitizer

(Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer)

Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer

{Precision 25MHz TCXO with single shot 100MHz 8bit ultra low power 8 bit digitizer}
Data logging  
  • 16,000 with B-scan image & gauge settings
  • 210,000 – coating, material, min, max thickness
  • sequential and grid logging
  • Alpha numeric batch identification
  • OBSTRUCT indicates inaccessible locations
  • 16,000 with B-scan image & gauge settings
  • 210,000 – coating, material, min, max thickness
  • sequential and grid logging
  • Alpha numeric batch identification
  • OBSTRUCT indicates inaccessible locations
  • 8,000 with A/B-scan image & gauge settings
  • 210,000 – coating, material, min, max thickness
  • sequential and grid logging
  • Alpha numeric batch identification
  • OBSTRUCT indicates inaccessible locations
Calibration Options

(Single, two point, velocity & material type)

Single, two point, velocity & material type

{Single, two point, velocity & material type}

 Single, two point, velocity & material type
Transducer Probe Type  Dual element

{Dual element}

Dual element & flaw prove up

 Dual element} & flaw prove up}
Transducer Frequency Range 1 – 10MHz 1 – 10MHz 1 – 10MHz 1 – 10MHz
Transducer recognition Automatic & manual – selectable from a list  Automatic & manual – selectable from a list Automatic & manual – selectable from a list Automatic & manual – selectable from a list
V-path / dual path error correction  Automatic  Automatic Automatic Automatic
Probe zero Automatic & manual (via integrated probe disk) Automatic & manual (via integrated probe disk) Automatic & manual (via integrated probe disk) Automatic & manual (via integrated probe disk)
Display  1/8 VGA (grayscale)
62 x 45.7mm
(2.4 x 1.8 inches)
viewable area

1/8 VGA (grayscale)
62 x 45.7mm
(2.4 x 1.8 inches)
viewable area

1/8 VGA (grayscale)
62 x 45.7mm
(2.4 x 1.8 inches)
viewable area

 1/4 VGA AMOLED colour display
57.6 x 43.2mm
(2.27 x 1.78inch)
viewable area
Display Refresh Rate  25Hz 25Hz 25Hz 120Hz
Units (selectable)  mm or inches  mm or inches mm or inches mm or inches
Backlight

on / off / auto

 on / off / auto on / off / auto adjustable brightness
Repeatability / Stability Indicator

 

  

 

 
Battery Type 3 x AA alkaline 3 x AA alkaline 3 x AA alkaline 3 x AA alkaline
Battery Life (approximate) 150 hours 150 hours 50 hours 25 hours
Low Battery Indicator

 

 

 

 
Battery Save Mode  auto  auto  auto auto
Operating Temperature  -10 to 60ºC (14 to 140ºF)  -10 to 60ºC (14 to 140ºF)  -10 to 60ºC (14 to 140ºF) -10 to 60ºC (14 to 140ºF)
Size (w x h x d)  63.5 x 165.0 x 31.5mm
(2.5 x 6.5 x 1.24 inches)		  63.5 x 165.0 x 31.5mm
(2.5 x 6.5 x 1.24 inches)		  63.5 x 165.0 x 31.5mm
(2.5 x 6.5 x 1.24 inches)		 63.5 x 165.0 x 31.5mm
(2.5 x 6.5 x 1.24 inches)
Weight (including batteries) 383g (13.5oz) 383g (13.5oz) 383g (13.5oz) 383g (13.5oz)
Aluminium case design with gasket sealed end
caps, waterproof membrane keypad

 

 

 

 
Transducer Connector Type  LEMO  LEMO  LEMO LEMO
RS232 Interface  Bi-directional  Bi-directional  Bi-directional Bi-directional
Packing List Elcometer NDT CG100B gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries Elcometer NDT CG100BDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable Elcometer NDT CG100ABDL gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable Elcometer NDT CG100ABDL+ gauge, couplant, carry case, user manual, test certificate, 3 x AA batteries, ElcoMaster® software, transfer cable
‌‌‌‌‌‌
برگشت به بالا